Newsbrief

Expertly Curated Sterilization and Infection Control News
 

2 Leading Plastic Surgeons,
1 Reason to Love Andersen:
“It saves my practice money!”

Plastic surgeons also love:
ROI in just a few months, tabletop, free support & training, only 17.6g of gas/cycle

Why Plastic Surgeons Love Andersen

Andersen Sterilizers News  | AUGUST 17, 2020

Andersen Sterilizers’ systems are the ideal solution for plastic surgeons as they satisfy all your practice’s top challenges and requirements.
  • Limited Budget Affordable
  • Staff Training Free for Life
  • Expensive Instruments to Sterilize Versatile (delicate hand pieces, fiber optics, plastics, metal, rubber & more)
  • Staff Safety Simple & Easy to Use
  • Limited Space Tabletop Sterilizer
  • Efficiency Only 17.6g of gas per cycle
  • Support Gas Sterilization Expert Available 24/7
  • Installation Expense Simple Installation

We recently reached out to two prominent plastic surgeons who consider their Andersen sterilizer one of the most critical, cost-effective investments made for their practice. And, the quickest investment to recoup its value. But don’t take our word for it – here’s what they had to say!

Hunstad Testimonial Perfect
Play Video
Dr. Joseph P. Hunstad, MD, FACS
H/K/B Cosmetic Surgery – Charlotte, NC

Practicing: 29 years / Andersen Sterilizer User: 20 years

Egozi Testimonial
Play Video
Dr. Eric I. Egozi, MD
Egozi Plastic Surgery CenterTampa Bay, FL

Practicing: 15 years / Andersen Sterilizer User: 2 years

Don’t have time to watch the quick videos above & just want the highlights?

How quickly did you see a return on investment for your Andersen Sterilizer?

(In the 20 years Dr. Hunstad has been an Andersen customer, he has used both the Anprolene system and the EOGas 4 heated-cycle system.)

Anprolene: “They recoup their value within a couple of weeks.” [Watch]
EOGas 4: “We probably recouped the benefit from that within a couple of months.” [Watch]
- Dr. Hunstad

What do you sterilize in your Andersen system?

When very delicate instruments are run through repeated steam sterilization cycles, they deteriorate. They tend to fail. They get worn. Rust occurs because of the water environment and it’s really a problem.” [Watch]

“Steam autoclaving really deteriorates the quality of (delicate instruments), whereas gas autoclaving is fantastic because it preserves the sharpness and integrity of these instruments.” [Watch]
- Dr. Hunstad
“Items we can’t put into an autoclave – fiberoptic equipment, fiberoptic cords, plastic cords, disposable fiberoptic equipment, and plastic equipment we try to use more than once. We use it for gauze, for all metal equipment as well but, in particular, plastic equipment and fiberoptic equipment - it works very, very well." [Watch]

“It holds five times what we can in a typical Midmark autoclave.” [Watch]
- Dr. Egozi
Play Video
Want to hear more from Dr. Hunstad? We don’t blame you! Here’s a more extensive interview, just for you…
Dr. Joseph P. Hunstad, MD, FACS
H/K/B Cosmetic Surgery – Charlotte, NC

Practicing: 29 years / Andersen Sterilizer User: 20 years

Learn more about your affordable, tabletop gas sterilization solutions:

Anprolene Best Value

Anprolene

Three sizes to choose from. Room temperature. Tabletop cabinets with active aeration. The least expensive, low temperature sterilization cabinets available.

EOGas 4 Best Speed

EOGas 4

50⁰C or 30⁰C cycle, high efficiency EO Sterilizer. Tabletop cabinet with active aeration. Sterilizes in as little as 3.5 hours. The fastest EO sterilizer available.

Share this Newsbrief

Share on facebook
Share on linkedin
Share on twitter
Share on email
Scroll to Top