Andersen is proud to offer terminal sterilization solutions to many industries. All are competitively priced, easy to use and offer unparalleled versatility.
Plastic Surgeons tell us they often achieve full ROI in a few months or even weeks simply by sterilizing reusable items to prolong their useful life (please consult IFUs).
All Andersen sterilizers offer terminal sterility (10-6 SAL) at a very competitive price point.
You'll be surprised all the other things you'll start throwing in your sterilizer. Plastic, rubber and cellulose that can't go in your autoclave and high-dollar items you want to last longer!
With Andersen, achieve 10-6 SAL terminal sterilization without loss of efficacy - no dulling, clouding or degrading. How much could just one overnight cycle of these items save your practice?
Several of our sterilizers are FDA cleared for medical settings. We have 18 clearances covering everything from the sterilization of the longest and narrowest duodenoscope to rubber, plastic and cellulose.
Superbugs endanger your patients, staff and the long term stability of your facility. You need an FDA-cleared terminal sterilization solution. With incidents on the rise, sterility is no longer a luxury but, rather, a simple necessity.
When you think about staff time management, don’t just consider cycle time, also consider capacity. Instead of running all day, staff can run one cycle overnight.
High volume, small footprint. Compared to others, our chambers are big and our cabinets are small so you can sterilize more without taking up so much counter or floor space.
We are proud to offer abators that employ a dry catalyst resin. The resin converts ethylene oxide to biodegradable organic compounds. This is in contrast to catalytic abators that burn off EO and can be expensive to install.
Low acquisition and per cycle cost. Easy and inexpensive installation - no external air compressors or water lines. Many see full ROI in a few months or even a few weeks.
Ethylene oxide is the gold standard in sterilization. It offers hospital-level sterility assurance (10⁻⁶) along with
unparalleled gentleness and material compatibility.
We’ve got the EOGas 4, the heated one, which is much larger capacity, much more expensive. We probably recouped the benefit form that within a couple of months.
We also have some of the smaller ones that almost recoup their value within a couple of weeks.
Dr. Joseph Hunstad
Board Certified Plastic Surgeon
H/K/B Cosmetic Surgery
Charlotte, NC
Items we can’t put into an autoclave – fiberoptic equipment, fiberoptic cords, plastic cords, disposable fiberoptic equipment, and plastic equipment we try to use more than once.
We use it for gauze, for all metal equipment as well but, in particular, plastic equipment and fiberoptic equipment – it works very, very well.”
Dr. Eric I. Egozi, MD
Board Certified Plastic Surgeon
Egozi Plastic Surgery Center
Tampa Bay, FL
When very delicate instruments are run through repeated steam sterilization cycles, they deteriorate. They tend to fail. They get worn. Rust occurs because of the water environment and it’s really a problem.”
Dr. Joseph Hunstad
Board Certified Plastic Surgeon
H/K/B Cosmetic Surgery
Charlotte, NC
It’s super easy to use. Very effective. The one thing I really like about it is: The machines, they never fail. We don’t really have an issue with having to turn equipment over because we know that it’s going to be successful every time.
The machine that we have is so quick. We’re able to process a lot of our equipment that typically, in a normal sterilizer you wouldn’t be able to do because it would damage the equipment.”
Kristin Morrison
Registered Nurse
H/K/B Cosmetic Surgery
Charlotte, NC
We received the sterilizer today, thank you. Installation was super easy! We already have it up and running. I appreciate your help.”
Angie Cox, CST
Certified Technologist
Artistic Plastic Surgery
Tacoma, WA
Two leading plastic surgeons with one big reason for loving Andersen: “It saves my practice money!” Watch their testimonials now. Andersen Sterilizers’ systems are the ideal solution for plastic surgeons as they satisfy all your practice’s top challenges and requirements, including: ROI in just a few months, tabletop, free support & training, only 17.6g of gas per cycle and more!
