Andersen is proud to offer terminal sterilization solutions to many industries. All are competitively priced, easy to use and offer unparalleled versatility.
When you use endoscopes on a regular basis, you need an FDA-cleared, low temperature gas sterilizer that's easy to use and install. All Andersen sterilizers offer terminal sterility (10-6 SAL), giving you the competitive advantage over practices that only use HLD.
Working with the ear, nose and throat entails (pardon us) a lot of saliva and mucus. Give your patients a higher level of confidence by sterilizing any instruments that touch those sensitive mucous membranes.
You'll be surprised all the other things you'll start throwing in your sterilizer. Plastic, rubber and cellulose that can't go in your autoclave and high-dollar items you want to last longer!
Commonly Sterilized Items
With Andersen, achieve 10-6 SAL terminal sterilization without loss of efficacy (dulling, clouding or degrading):
Several of our sterilizers are FDA cleared for medical settings. We have 18 clearances covering everything from the sterilization of the longest and narrowest duodenoscope to rubber, plastic and cellulose.
Superbugs endanger your patients, staff and the long term stability of your facility. You need an FDA-cleared terminal sterilization solution. With incidents on the rise, sterility is no longer a luxury but, rather, a simple necessity.
When you think about staff time management, don’t just consider cycle time, also consider capacity. Instead of running all day, staff can run one cycle overnight.
High volume, small footprint. Compared to others, our chambers are big and our cabinets are small so you can sterilize more without taking up so much counter or floor space.
We are proud to offer abators that employ a dry catalyst resin. The resin converts ethylene oxide to biodegradable organic compounds. This is in contrast to catalytic abators that burn off EO and can be expensive to install.
Low acquisition and per cycle cost. Easy and inexpensive installation - no external air compressors or water lines. Many see full ROI in a few months or even a few weeks.
Ethylene oxide is the gold standard in sterilization. It offers hospital-level sterility assurance (10⁻⁶) along with unparalleled gentleness and material compatibility.
In this review, 6 of 17 studies implemented EtO sterilization as an intervention during infectious outbreaks; in at least 3 and possibly 6 studies this intervention yielded an absence of culture positivity from duodenoscopes at all sites, thereby stopping the outbreaks.
Similar data exist for EtO sterilization ceasing outbreaks attributed to bronchoscopes.
Therefore, the implementation of EtO sterilization appears to be an effective tool for terminating carbapenem-resistant Enterobacteriaceae and multidrug-resistant organism outbreaks associated with duodenoscopes.”
Multisociety Guideline on Reprocessing Flexible GI Endoscopes and Accessories
More healthcare–associated outbreaks have been linked to contaminated endoscopes than to any other medical device.
To prevent the spread of health-care–associated infections, all heat-sensitive endoscopes must be properly cleaned and, at a minimum, subjected to high-level disinfection after each use.
High-level disinfection can be expected to destroy all microorganisms, although when high numbers of bacterial spores are present, a few spores might survive.”
The Anprolene AN75 Series stands out as the only FDA-cleared room-temperature ethylene oxide gas sterilizer on the market. This innovative system is specifically designed for facilities where space is at a premium, offering maximum performance in a compact design. With its affordability and ease of use, Anprolene is a trusted solution for small clinics, dental offices, and other healthcare settings that require reliable sterilization without compromising space or budget.
For facilities requiring speed and efficiency, the FDA-cleared EOGas 4 is the perfect solution. With four sterilization cycles to choose from, this system allows users to tailor the sterilization process to their needs. The fastest cycle completes in just 3.5 hours, making it ideal for high-value instruments that are reused multiple times daily. The EOGas 4 delivers both speed and reliability, making it a top choice for busy medical and research facilities.
For high-throughput facilities, the EOGas 3 offers unparalleled flexibility and performance. This system is designed to meet the demands of facilities with multiple specialists and high sterilization needs. With the ability to run 6-10 loads independently, the EOGas 3 allows users to start new sterilization cycles while others are still in progress. This ensures a constant flow of sterile instruments, making it perfect for hospitals, surgical centers, and large laboratories.
Andersen Sterilizers founder, H.W. Andersen, M.D., designed and patented the first self-contained Biological Indicator (BI) in 1969. Long after his patent expired, his invention has become an industry in and of itself.