Andersen is proud to offer terminal sterilization solutions to many industries. All are competitively priced, easy to use and offer unparalleled versatility.
FDA-cleared, low temperature gas sterilizers - easy to use and install. Several tabletop models to choose from. All Andersen sterilizers offer terminal sterility (10-6 SAL) at a very competitive price point. Your facility can afford to have a sterile instrument EVERY time.
Andersen has FDA-clearances for complex devices like urological endoscopes and bronchoscopes and we currently hold the only sterilization system FDA 510k clearance for terminal sterilization of duodenoscopes and colonoscopes.
Commonly Sterilized Items
With Andersen, achieve 10-6 SAL terminal sterilization without loss of efficacy (dulling, clouding or degrading):
Flexible endoscopes
Delicate hand-pieces and associated cording
Mix-material instruments or trays
Implants
Sharps
Plastic
Rubber
Non-wovens/Cellulose
Fiber optics
Electronics
Batteries
FDA Clearances
Several of our sterilizers are FDA cleared for medical settings. We have 18 clearances covering everything from the sterilization of the longest and narrowest duodenoscope to rubber, plastic and cellulose.
Superbugs endanger your patients, staff and the long term stability of your facility. You need an FDA-cleared terminal sterilization solution. With incidents on the rise, sterility is no longer a luxury but, rather, a simple necessity.
When you think about staff time management, don’t just consider cycle time, also consider capacity. Instead of running all day, staff can run one cycle overnight.
High volume, small footprint. Compared to others, our chambers are big and our cabinets are small so you can sterilize more without taking up so much counter or floor space.
We are proud to offer abators that employ a dry catalyst resin. The resin converts ethylene oxide to biodegradable organic compounds. This is in contrast to catalytic abators that burn off EO and can be expensive to install.
Our exclusive technology works behind the scenes to keep your staff safe. The microdose of EO and smart cabinet design are just two of these safeguards.
Ethylene oxide is the gold standard in sterilization. It offers hospital-level sterility assurance (10⁻⁶) along with unparalleled gentleness and material compatibility.
We have been using Andersen products for the last 15 years to sterilize our cystoscopy equipment. We recently needed to upgrade our equipment and found them to be extremely helpful in determining and meeting requirements for sterilization equipment.
Within a week we had our new unit up and running and support service was always available to help us with our questions. I highly recommend Anderson Products for any gas sterilization system needs.”
Dr. Douglas R. Birns
Urologist Mount Sinai Beth Israel Hospital New York, NY
I tell everybody, I used ethylene oxide my entire career in the hospital. And as long as you do it safely, as long as you have the equipment installed to protect your staff, your fellow co-workers, your general hospital area, it is a perfectly safe and a very, very good sterilant.”
In our Ambulatory Surgical Center, cost savings are a very high priority. Minimizing repeated steam sterilization of delicate instruments, thus preventing their damage is also a high priority.
These systems offer us significant cost savings and preservation of our fine instrumentation. I have used Andersen Products gas sterilization units for over 10 years and estimate the cost savings to be in excess of $50,000 annually. I have repeatedly recommended these units to other plastic surgeons and plastic surgery centers to address these important sterilization needs.”
Dr. Joseph P. Hunstad M.D., FACS
Board Certified Plastic Surgeon HKB Cosmetic Surgery Charlotte, NC
The [AN75] unit is very, very easy to use. The nurses are happy to use it. And it’s very quick and convenient. We would highly recommend it.
We wouldn’t know what to do without it. We use it virtually every time we have surgery.”
Board Certified Plastic Surgeon Brandon Plastic Surgery Brandon, FL
It’s super easy to use. Very effective. The one thing I really like about it is: The machines, they never fail. We don’t really have an issue with having to turn equipment over because we know that it’s going to be successful every time.
The machine that we have is so quick. We’re able to process a lot of our equipment that typically, in a normal sterilizer you wouldn’t be able to do because it would damage the equipment.”
The only FDA-cleared, room-temperature gas sterilization solution on the market. When space is at a premium, Anprolene is king. All this at a very affordable price point.
The FDA-cleared EOGas 4 has four cycles to choose from. The fastest is just 3.5 hours. If you use the same high-dollar instrument more than once a day, this one’s for you!
Need a constant flow of sterile instruments for multiple specialists? Run 6-10 loads independently - start a new one while others are in process. Units can be validated.
Andersen Sterilizers founder, H.W. Andersen, M.D., designed and patented the first self-contained Biological Indicator (BI) in 1969. Long after his patent expired, his invention has become an industry in and of itself.
